Nortel BayStack 410 24T - System Characteristics; System Characteristics Screen

Using the Console Interface
309985-B Rev 00
3-15
System Characteristics
The System Characteristics screen (Figure 3-5) allows you to view system
characteristics and contains three user-configurable fields: sysContact, sysName,
and sysLocation.
Choose System Characteristics (or press s) from the main menu to open the
System Characteristics screen.
Figure 3-5. System Characteristics Screen
Table 3-4 describes the System Characteristics screen fields.
System Characteristics
Operation Mode: Stack, Unit # 2
Size Of Stack: 4
Base Unit: 1
MAC Address: 00-00-00-00-00-00
Reset Count: 51
Last Reset Type: Power Cycle
Power Status: Primary Power
Local MDA Type: 4 port 10Base-T/100Base-TX with Autosense, 400-4TX MDA
sysDescr: BayStack 410-24T HW:Revx FW:Vx.xx SW:vx.x.x.xx ISVN:x
sysObjectID: 1.3.6.1.4.1.45.3.35.1
sysUpTime: 00:06:26
sysServices: 3
sysContact: [ Mario Lento ]
sysName: [ Publications ]
sysLocation: [ Building 12, Floor 20 ]
Enter text, press <Return> or <Enter> when complete.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.