Using the Console Interface
309985-B Rev 00
3-23
When the switch software detects a security violation, you can set the system to
respond in any of the following ways:
• Send a trap
• Turn on destination address (DA) filtering
• Disable the specific port
You can also combine any of the three options listed above.
Choose MAC Address-Based Security (or press s) from the Switch Configuration
Menu screen to display the MAC Address Security Configuration Menu screen.
Figure 3-8. MAC Address Security Configuration Menu
Table 3-7 describes the MAC Address Security Configuration Menu options.
MAC Address Security Configuration Menu
MAC Address Security Configuration...
MAC Address Security Port Configuration...
MAC Address Security Port Lists...
MAC Address Security Table...
Return to Switch Configuration Menu
Use arrow keys to highlight option, press <Return> or <Enter> to select option.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.
To Next Page