Nortel BayStack 410 24T - Hardware Unit Information; Spanning Tree Configuration

Using the Console Interface
309985-B Rev 00
3-91
Hardware Unit Information
The Hardware Unit Information screen (Figure 3-37) lists the switch models,
including any installed MDA and Cascade modules, that are configured in your
standalone or stack configuration.
Choose Display Hardware Units (or press h) from the main menu to open the
Hardware Unit Information screen.
Figure 3-37. Hardware Unit Information Screen
Spanning Tree Configuration
The Spanning Tree Configuration Menu screen (Figure 3-38) allows you to view
spanning tree parameters and configure individual switch ports to participate in
the spanning tree algorithm (STA). To modify any of the spanning tree parameters,
see your SNMP documentation.
Hardware Unit Information
Switch Model MDA Model Cascade MDA
---------------- --------- -----------
Unit #1 BayStack 450-24T None 400-ST1
Unit #2 BayStack 450-12T 450-1SX 400-ST1
Unit #3 BayStack 450-24T 400-4FX 400-ST1
Unit #4 BayStack 410-24T 400-4FX 400-ST1
Unit #5 BayStack 450-24T None 400-ST1
Unit #6 BayStack 450-12T 450-1SX 400-ST1
Unit #7 BayStack 450-24T 400-4FX 400-ST1
Unit #8 BayStack 410-24T None 400-ST1
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.