Nortel BayStack 410 24T - Stack Operation; Baystack 400-ST1 Cascade Module

Introduction to the BayStack 410-24T Switch
309985-B Rev 00
1-27
Stack Operation
BayStack 410-24T switches provide fail-safe stacking when you install the
optional BayStack 400-ST1 Cascade Module (see “
Fail-Safe Stack Application”
on page 1-26
). You can connect up to eight switches to provide uninterrupted
connectivity for up to 224 ports. The entire stack is manageable as a single unit.
Installation instructions are provided with the BayStack 400-ST1 Cascade Module
(see your Nortel Networks sales representative for ordering information).
BayStack 400-ST1 Cascade Module
The front panel components of the BayStack 400-ST1 Cascade Module are shown
in Figure 1-10
.
Component descriptions follow the figure.
Figure 1-10. BayStack 400-ST1 Front Panel Components
Cascade A Out
Cascade A In
Unit Select
Base
1 = Blank connectors (unused)
2 = Cascade A Out connector
3 = Unit Select switch
4 = Cascade A In connector
3
BS41009A
4
1
2