Nortel BayStack 410 24T - Figure 3-50. Nortel Networks Logo Screen

Using the Console Interface
309985-B Rev 00
3-113
Figure 3-50. Nortel Networks Logo Screen
Upon successful completion of the power-up self-tests, the switch is ready for
normal operation.
To access the BayStack 410-24T main menu, press [Ctrl]-Y.
Note:
The Nortel Networks logo screen for your switch will display the
BayStack 410-24T model number and the current hardware, firmware, and
software versions.
*******************************************************
* Nortel Networks *
* Copyright (c) 1996,2000 *
* All Rights Reserved *
* BayStack 410-24T *
* Versions: HW:Revx FW:Vx.xx SW:vx.x.x.x ISVN:x *
*******************************************************
Enter Ctrl-Y to begin.