Nortel BayStack 410 24T - Page 75

Introduction to the BayStack 410-24T Switch
309985-B Rev 00
1-47
Ports 2, 4, 6, 8, 10, and 11 are now untagged members of VLAN 3 as shown in
Figure 1-25
on page 1-45.
Figure 1-27. VLAN Configuration Screen Example
To configure the PVID (port VLAN identifier) for Port 8:
1.
From the VLAN Configuration screen, press [Ctrl]-R to return to the
VLAN Configuration Menu.
2.
From the VLAN Configuration Menu, select VLAN Port Configuration
(or press c).
The default VLAN Port Configuration screen opens (Figure 1-28
).
The VLAN Port Configuration screen settings shown in Figure 1-28
are default
settings.
VLAN Configuration
Create VLAN: [ 3 ] VLAN Type: [ Port-Based ]
Delete VLAN: [ ] Protocol Id (PID): [ None ]
VLAN Name: [ Mary's VLAN ] User-Defined PID: [ 0x0000 ]
Management VLAN: [ Yes ] VLAN State: [ Active ]
Port Membership
1-6 7-12
------ ------
Unit #1 -U-U-U -U-UU-
KEY: T = Tagged Port Member, U = Untagged Port Member, - = Not a Member of VLAN
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.