297-1001-330 Standard 11.04 June 1998
Section
CONTROL
Description
Call processing traps
Definition
The per-attempt rate of occurrence of traps in call processing code.
DMS-100G Switch does not contribute to or provide an equivalent of OM
group OFZ, measurements NIN and NIN2
Measurement list
CPTRAPS uses measurement CP CPTRAP.
Normalizer
CPTRAPS is normalized per total call attempt on the switch.
Diagnostics
Same as SWERRS. Notify Nortel Technical Support promptly if traps occur
and the cause cannot be identified locally. Be ready to produce copies of
traps and trapinfo output as required. Check group CP for volume of trap.
Also check logs SWERR, TRAP, AUDT101, AUDT103, AUDT197,
CC103, and CC104.
6-102 SPMS MTCEPERF index descriptions 6-1026-102
Basic index CPTRAPS
To Next Page
Loading...
Need help?
General
