Nortel DMS-100 Series Application Guide

2-12 Startup procedures
297-1001-330 Standard 11.04 June 1998
Figure 2–1xxx
Automatically generated SPMS report
89/07/12 <<*>> F04314_00 SITE NAME BCS29ZI RTM 041289 <<*>>
1989/12/08 15:24:30.825 FRI.
TOTATT (K)
L
891207 89 DEC
TO DATE
89 NOV
51 739 1298
*R*
SERVICE A
..MTCESERV A
....MTCACCS A
......CCRESET B
......ORGLNOUT B
......ORGPMBLK B
....INSIGFL A
......TINSIGFL B
88.4* 93.6 98.0
81.4* 90.1 98.0
44.5** 73.0** 98.9
0.0** 51.3** 100.0
92.6 96.9 97.0
74.2** 87.1* 99.0
92.5 93.7 97.0
95.5 96.8 99.0
The SET subcommand
The SET subcommand allows you to set the format and content of your
manually generated SPMS report. The command format is as follows:
SET <option> <argument>
PAGEWIDTH <numchars>{50 to 131}
TREEDEPTH <level> {0 to 10}
FORMFEED <format> {DMS|IBM}
TREETOPS [<indexnamel>]..[<indexnamek>] | ALL
EXCEPTVAL <indexname> {0 to 1001}
FORMAT <output> {SHORT | LONG}
INDICES <indices> {AVAIL | ALL}
Each option is described below.
PAGEWIDTH is the width of the output page in characters. The default
value is 80 characters for each page.

Nortel DMS-100 Series Specifications

General

Capacity	Up to 100, 000 lines
Features	ISDN support
Redundancy	Yes
Signaling	SS7, ISDN
Power	-48V DC