DMS-100 Family Switch Performance Monitoring System Application Guide BASE09 and up
5-1
SPMS SERVICE index descriptions
The following chapter provides index descriptions for the SERVICE branch
of SPMS. The service index (SERVICE) summarizes switch performance as
seen by the users of the switch. The high-level SERVICE index has two
main branches, the maintenance service index (MTCESERV) and the
provisioning service (PROVSERV) index.
Where to find an index
This chapter provides descriptions for each aggregate and basic index that
contribute to the SERVICE branch of SPMS.
The index descriptions are organized according to the DMS-100 hierarchy
shown in Figure 3–2, SPMS structure for DMS-100. The indices shown in
this figure supply information for an NT40 switch. Because many of the
indices that pertain to an NT40 switch also pertain to a SuperNode switch
and an enhanced network (ENET), the DMS-100 indices are not individually
identified by switch type.
The index descriptions specifically provided for a SuperNode switch are
identified as SuperNode components. These indices cannot function on an
NT40 switch. See figure 3–3, SPMS structure for SuperNode, for the index
hierarchy that applies to a SuperNode switch.
The ENET and DM-100G SWITCH indices are identified like the
SuperNode indices. See Figure 3–4 for SPMS structure for ENET switch
indices, and Figure 3-5 for SPMS structure for DMS-100G switch indices.
See the index for an alphabetical list of all the indices.
How the indices are presented
This chapter contains aggregate and basic index descriptions for the
SERVICE branch of SPMS.
The following headings appear in each description of an aggregate index:
• section
• description
To Next Page
Loading...
Need help?
General
