24
Options List
5. Press the Dial Pad Key that is printed
with the first letter in your new label.
Press the key until the correct character
appears.
6. Use the Case Key to change the case
of the letter, as needed.
7. Press the right Navigation Key once to
move the cursor (so you can enter the
next letter) when the desired letter
appears.
8. Repeat steps 5, 6, and 7 until you
have changed the entire label.
Press the Done Key to save changes. Press the Quit Key or Options Key to exit.
Note: For a detailed example of using the dial pad to enter text into your M3900 Series
telephone, please see “Add a Personal Directory entry” on page 39.
To restore one key label:
1. From the Feature Key menu, use the
down Navigation Key to highlight
Restore one key label.
2. Press the Select Key.
3. Press the Programmable Line
(DN)/Feature Key (self-labeled) that
you want to restore to the original
label (e.g., Purchasing).
Press the Done Key to return to the Options List menu. Press the Quit Key or
Options Key to exit.
Note: You cannot change the label on the primary DN. Press the Shift Key if the label you
want to change is on the second layer of the Programmable Line (DN)/Feature Keys
(self-labeled).
Case
Restore one key label
Select
Purchasing
To Next Page
