Notifier RP-1001 - Four-Wire Smoke Detector Power; RMS Regulated & Nonresettable Power

Product Description Specifications
12 RP-1001 15150:F 05/24/2001
)RXUZLUH6PRNH'HWHFWRU3RZHU
Up to 200 mA is available for powering four-wire smoke detectors.
Maximum ripple voltage: 1.0 V p-p
1RQUHVHWWDEOH3RZHU
Total DC current available from this output is up to 200 mA (subtracted from four-wire smoke
detector power). Maximum ripple voltage: 1.0 V p-p
5065HJXODWHG3RZHU
Total DC current available for powering external devices is 0.5 amp (subtracted from 2.25 amps
available to Notification Appliance Circuits).
Maximum ripple voltage: 100 mV p-p
Note: For device compatibility data, refer to the Device Compatibility Document.
www.PDF-Zoo.com