21
128-0521-002
5.1 Ground Fault Interrupters (GFI)
For a GFI to be compatible with the DVR motor, it is recommended have a leak current threshold rating of 30mA
(0.03A)
Note: Normal household GFI will typically be rated at 5mA (0.005A) which may trigger
during the operation of the DVR motor. However, frequent tripping of the GFI will not
cause any harm to the DVR motor or its control electronics as it has a built-in
protective circuit to prevent damage from frequent switching.
5.2 Input Voltage Selection
The NOVA Nebula lathe is capable of handling both 110V and 220V without any changes to its internal circuits.
The lathe will automatically recognize the input voltage to the lathe and adjust the output power. Simply change the
input power plug to a suitable plug for the desired input voltage to change the lathe’s input voltage.
Electrical outlet plugs Country Standard
USA, Canada & Japan 110V 15A
USA 220V (NEMA 6-15P)
Australia/New Zealand & China 220V 10A
Europe except UK and Ireland 220V 10A
South Africa 220V 10A
UK and Ireland 220V 10A
To Next Page
Loading...
Need help?
General
