6
128-0521-002
2.NOVA Nebula 18” DVR Lathe Features & Specification
Feature Name Description
DIGITAL VARIABLE RELUCTANCE
(DVR) ELECTRONIC DRIVE
The DVR motor uses smart motor technology to provide an incredibly smooth and
powerful drive. The controller constantly monitors the spindle position and
maintains optimal spindle speed. Additional power is added as it senses extra load
from the tool.
POWER TO TURN AND BURN
110-120V / 15A 1.5KW (2.0HP) *
*For 110V / 15A, the motor power is derated to 2.0 HP by current limit in
software. To get 2.5HP, the input power is required change to 220V/10A or using
dual 110V input.
Slidable 360° SWIVEL
HEADSTOCK
Lock at any position, plus detent locating positions at 0°, 22.5°, 45° and 90°.
High accuracy and easy swivel
SOLID BED STRUCTURE
CAD designed webbing to absorb vibration throughout the bed length.
Exceptional structural strength.
8 FAVOURITE SPEED FUNCTION
Program your favourite speeds for faster and more efficient project set ups
FLEXIBLE CAPACITY TO MATCH
YOUR PROJECT
- 18" / 457mm Capacity Over Bed
- 35" / 889mm Capacity Outboard (with optional outrigger accessory)
- 25”/ 640 mm Between Centres
SAFETY SENSING FEATURE
It senses faults in the setup and advises of safety issues - such as chisel dig in and
spindle lock. It then instantly shuts down power to the spindle.
ENERGY EFFICIENT
Intelligent (computer controlled) motor only draws as much power as it needs for
the application
INCREDIBLE VARIABLE SPEED
RANGE
50 RPM - 4,000 RPM
WARRANTY
* 5 Year Warranty on Parts and Components
* 2 Year Warranty on Motor and Electronics
* Restrictions apply
To Next Page
Loading...
Need help?
General
