25
128-0521-002
6.5 Forward/Reverse selection
Press the
key while the LCD is on the Home page - the direction indicator will be toggled between forward and reverse.
*For your safety, do not change the direction while the lathe is running.
6.6 Speed Control
Nebula HMI provides multiple methods of speed control.
6.6.1 Fine/Coarse Speed adjustment by Speed Knob
While the LCD is on the Home Page or the Motor Running page;
Fine Speed control – Turn
clockwise or anti-clockwise to increase or decrease the speed in fine increments.
Coarse speed control – HOLD DOWN
and turn the speed knob to increase or decrease in larger increments.
To Next Page
Loading...
Need help?
General
