Nova NEBULA 55600 - Firmware Upgrade and Version Information

34
128-0521-002
6.7.10 Firmware Upgrade
The firmware version of the HMI can be upgraded via the included USB cable accessory and a PC with internet access. Be
sure to check
https://www.teknatool.com/upgrade-your-firmware/ periodically for firmware upgrades for your
machine, which may allow new features or software improvements that could enhance the performance of the lathe.
Use to select Firmware Upgrade
Press
or to entering USB mode
Press
to quit
6.7.11 Version Info
Use
to select Version Info
Press or to continue
Or press
to go back