31
128-0521-002
6.7.6 Lathe Settings
Use key to enter “Lathe Settings”.
6.7.6.1 Display Size: Change the font size on the display.
Use or press to toggle the setting between Normal and
Large.
6.7.6.2 Assisted Brake: Turn on or off the Brake when <OFF>
bottom is pressed.
Use or press to toggle the settings between ON and OFF.
Press
to confirm ON operation, press to cancel the
change.
6.7.6.3 E-Stop Brake: Turn on or off the Brake When EMS
button is pressed.
Use or press to toggle the settings between ON and OFF.
Press
to confirm ON operation, press to cancel the
change.
6.7.6.4 Idle=Auto Stop: Turn on or off the Idle detection.
When it sets to ON, the lathe will monitor the spindle spinning and
will automatically stop the lathe if the spindle is in idle for 5mins.
Use
or press to change the settings between ON and
OFF.
Press to confirm ON operation, press to cancel the change.
6.7.6.5 Vibr. Sensor: Provides extra safety protection for
woodworking jobs.
Turn ON/OFF, adjust the sensitivity of the vibration sensor.
Use
or press to cycle the settings between ON, OFF, Low,
Med and High.
Push
to confirm ON operation, press to cancel the change.
6.7.6.6 Language: Provides English, German, and French
options for HMI display.
Use or press to change the settings among three
languages. Press
to quit.
To Next Page
Loading...
Need help?
General
