NUM 1040 W User Manual

Operator Panel Description
en-938821/2 3 - 1
3
3 Operator Panel Description
3.1 NUM Panels and Sub-Assemblies 3 - 3
3.1.1 NUM Panels 3 - 3
3.1.1.1 QWERTY Panel and CRT 3 - 3
3.1.1.2 50-Key Panels with CRT 3 - 4
3.1.1.3 50-Key Panel with LCD 3 - 4
3.1.1.4 Compact Panel 3 - 5
3.1.2 Display Screen 3 - 6
3.1.3 Status Window 3 - 7
3.1.4 Softkeys 3 - 8
3.1.4.1 Root Softkey Bar (Compact Panel) 3 - 8
3.1.4.2 Basic Softkeys 3 - 8
3.1.4.3 Mode Softkeys 3 - 8
3.1.4.4 JOG Softkeys 3 - 9
3.1.4.5 Tool Softkeys 3 - 10
3.1.4.6 Character Softkeys of the Compact Panel 3 - 10
3.1.5 Modal Data Window 3 - 11
3.2 Interactions Between Mode Selections and Display Pages 3 - 12
3.2.1 Neutral Mode 3 - 12
3.2.2 Interactions between Modes 3 - 12
3.2.3 Interactions between Modes and
Display Pages 3 - 12
3.3 Available Controls and Indicators 3 - 13
3.3.1 Keyboard Keys 3 - 13
3.3.1.1 Special Features of the 50-Key
Panel Keyboard 3 - 13
3.3.1.2 Special Features of the Compact
Panel Keyboard 3 - 13
3.3.1.3 Special Keyboard Keys 3 - 14
3.3.1.4 Special Control keys 3 - 15
3.3.1.5 Mode Selection Keys 3 - 16
3.3.1.6 Reset Key 3 - 16
3.3.1.7 Machine Panel Function Keys on the
Compact Panel 3 - 16
3.3.2 Softkeys 3 - 17
3.3.2.1 Root Softkeys (Compact Panel) 3 - 17
3.3.2.2 Basic Softkey Functions 3 - 17
3.3.2.3 Mode Softkey Functions 3 - 18
3.3.2.4 JOG Softkey Functions 3 - 19
3.3.2.5 Tool Softkey Functions 3 - 19
3.4 Special Keyboard Operations 3 - 20
3.4.1 Hardcopy 3 - 20
3.4.1.1 Hardcopy on Printer 3 - 20
3.4.1.2 Hardcopy in File 3 - 21
3.4.2 Keyboard Sound 3 - 22
3.4.3 Switching between Operator Panels 3 - 22
3.4.4 Switching between CNCs 3 - 23
3.5 Use of a 102/105-Key Keyboard with the Compact Panel 3 - 24

NUM 1040 W Specifications

General

Brand	NUM
Model	1040 W
Category	Controller
Language	English