EasyManua.ls Logo

Numatic NX1K - Filling the Clean Water Tank; Fill Level Indicator

Numatic NX1K
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
Note: A lter basket ensures that contaminants (i.e. leaves, hair, dirt, etc.) are not allowed to enter the clean water tank
during the lling process. Periodically inspect and clean if necessary.
The water level in the clean
water tank can be measured
using the visible oat inside the
clean water dump hose located
on the rear of the machine.
Do not overll the clean water
tank.
!!
The TVL850 is equipped with a large capacity 120 litre clean water tank,
allowing for large areas to be covered in a single ll.
To ll clean water tank, lift cover ap. Unscrew and and remove ller cap. Fill tank using a hose
or other preferred method.
Add cleaning chemicals to the tank following the manufacturers guidlines.
Filling the Clean Water Tank
Fill-Level Indicator
Machine Set-up Guide
ALWAYS ENSURE THAT THE MACHINE IS SWITCHED OFF BEFORE
MAKING ANY ADJUSTMENTS.
!!
WHEN HANDLING AND MIXING CHEMICALS
Always ensure that chemical manufacturers safety guidelines are followed.

Related product manuals