Nuova Simonelli TALENTO - Motor Replacement

Edition 02 to 12/2013
7.6
SERVICE MANUAL
7.4 MOTOR REPLACEMENT
After separating the pump from the motor (sec-
tion 7.3), the engineer needs to:
1 Lift up the machine (5 centimeter at least)
placing four suitable supports under the
feet.
2 Remove the two nuts under the machine,
using a 7 mm wrench.
3 Free the motor from the assembly.
4 Disconnect all connected wiring.
2
2
Fig. 14
3
Fig. 15
4
Fig. 16