Nuova Simonelli TALENTO - Waterstop Replacement

Edition 02 to 12/2013
7.7
SERVICE MANUAL
7.5 WATERSTOP REPLACEMENT
To replace the waterstop the engineer needs to:
1 Switch off the machine.
2 Remove the grounds drawer.
3 Turn the key anticlockwise.
4 Open the front panel.
5 Remove the water tray.
6 Remove the four screws supporting the bot-
tom front panel.
7 Take off the panel from the front.
3
2
1
4
Fig. 17
5
Fig. 18
6
6
6
6
Fig. 19
7
Fig. 20