Nvidia BlueField-3 - 9 Monitoring; 9.1 Thermal Sensors; 9.2 Heatsink

69
Pin# Signal Name Wire Type AWG# Detailed
Description
Pin# on the
other end
23 PCIE_CX_CPU_4N Micro coax 38 Connect from the
White Cabline CA-II
Plus harness to the
PCIe x16 Rx lanes of
the CPU/GPU/End-
Point. 220nF caps
are required on this
signal on the
ConnectX-7 card.
23
24 GND GND BAR 24
25 PCIE_CX_CPU_5P Micro coax 38 Connect from the
White Cabline CA-II
Plus harness to the
PCIe x16 Rx lanes of
the CPU/GPU/End-
Point. 220nF caps
are required on this
signal on the
ConnectX-7 card.
25
26 PCIE_CX_CPU_5N Micro coax 38 Connect from the
White Cabline CA-II
Plus harness to the
PCIe x16 Rx lanes of
the CPU/GPU/End-
Point. 220nF caps
are required on this
signal on the
ConnectX-7 card.
26
27 GND GND BAR 27
28 PCIE_CX_CPU_6P Micro coax 38 Connect from the
White Cabline CA-II
Plus harness to the
PCIe x16 Rx lanes of
the CPU/GPU/End-
Point. 220nF caps
are required on this
signal on the
ConnectX-7 card.
28
29 PCIE_CX_CPU_6N Micro coax 38 Connect from the
White Cabline CA-II
Plus harness to the
PCIe x16 Rx lanes of
the CPU/GPU/End-
Point. 220nF caps
are required on this
signal on the
ConnectX-7 card.
29
30 GND GND BAR 30