Nvidia BlueField-3 - 10 Finding the GUID;MAC on the DPU; 10.1 DPUs Board Label Example

70
Pin# Signal Name Wire Type AWG# Detailed
Description
Pin# on the
other end
31 PCIE_X_CPU_7P Micro coax 38 Connect from the
White Cabline CA-II
Plus harness to the
PCIe x16 Rx lanes of
the CPU/GPU/End-
Point. 220nF caps
are required on this
signal on the
ConnectX-7 card.
31
32 PCIE_CX_CPU_7N Micro coax 38 Connect from the
White Cabline CA-II
Plus harness to the
PCIe x16 Rx lanes of
the CPU/GPU/End-
Point. 220nF caps
are required on this
signal on the
ConnectX-7 card.
32
33 GND GND BAR 33
34 PCIE_CX_CPU_8P Micro coax 38 Connect from the
White Cabline CA-II
Plus harness to the
PCIe x16 Rx lanes of
the CPU/GPU/End-
Point. 220nF caps
are required on this
signal on the
ConnectX-7 card.
34
35 PCIE_CX_CPU_8N Micro coax 38 Connect from the
White Cabline CA-II
Plus harness to the
PCIe x16 Rx lanes of
the CPU/GPU/End-
Point. 220nF caps
are required on this
signal on the
ConnectX-7 card.
35
36 GND GND BAR 36
37 PCIE_CX_CPU_9P Micro coax 38 Connect from the
White Cabline CA-II
Plus harness to the
PCIe x16 Rx lanes of
the CPU/GPU/End-
Point. 220nF caps
are required on this
signal on the
ConnectX-7 card.
37