Nvidia DRIVE AGX Orin - Figure 1-3. Airflow Direction

Mechanical Dimensions
NVIDIA CONFIDENTIAL | SUBJECT TO CHANGE
NVIDIA DRIVE AGX Orin Developer Kit Mechanical and Installation Guide DI-10587-003_v02 | 5
Figure 1-3. Airflow Direction
Height
Width
Length
Connectors
(Rear panel)
Fan
(Front panel)
Cool Air Intake
Hot Air Exhaust
As shown in Figure 1-4, there are four mounting holes on the bottom of the developer system.
Please follow the guidelines below when installing the developer system in vehicle.
 The rubber feet on the bottom are for bench use. Remove them before installing in the
vehicle.
 Use four M6 screws through the mounting holes on the bottom side to secure the
developer system to the tray.
 Ensure a dust free environment; do not mount on carpet .
 Ensure a good GND connection to the chassis of the car.
 Ensure sufficient air flow.
!
CAUTION: The developer system must be mounted horizontally with the bottom side facing
downwards. DO NOT mount in any other orientation.