Nvidia DRIVE AGX Orin - Table 2-13. Ethernet Connector List

Interface Connectors
NVIDIA CONFIDENTIAL | SUBJECT TO CHANGE
NVIDIA DRIVE AGX Orin Developer Kit Mechanical and Installation Guide DI-10587-003_v02 | 24
Table 2-13. Ethernet Connector List
Connector
Ethernet
Ports
Description
MATEnet
100BASE-T1
6
Connects to Ethernet Switch 1 built-in
PHY
H-MTD Quad
(upper connector)
1000BASE-T1
4
Upper right pair (Pin 1-1/1-2): Connects through 1GbE PHY
to Ethernet Switch 1
Other three pairs: Connect through 1GbE PHY to Ethernet
Switch 2
H-MTD Quad
(lower connector)
1000BASE-T1
4
Connects through 1GbE PHY to Ethernet Switch 2
H-MTD Double
(top pair)
10GBASE-T1
1
Connects through 10GbE PHY to Orin-X MGBE controller C0
(UPHY2_L4)
H-MTD Double
(bottom pair)
1000BASE-T1
1
Connects through 1GbE PHY then Ethernet Controller to
Orin-X PCIe controller C7 (UPHY2_L0)
RJ45 (right)
10GBASE-T
1
Connects through 10GbE PHY to Orin-X MGBE controller C1
(UPHY2_L5)
RJ45 (bottom)
1000BASE-T
1
Connect through 1GbE PHY to Orin-X RGMII