NXP Semiconductors FS4500 - Connectors; Fig. 6. Test Points; Tab. 6. Test Point Definitions

NXP Semiconductors FS4500/FS6500 evaluation boards
KTFRDMFS4500-FS6500EVMUG
FS4500/FS6500 evaluation boards All information provided in this document is subject to legal disclaimers. © NXP B.V. 2017. All rights reserved.
User guide Rev. 4.0 — 12 June 2017
11 / 34
aaa-025546
.
Figure 6. Test points
Table 6. Test point definitions
Test point
name
Signal name Description
TP1 GND Ground
TP3 RXC CAN receiver data. Logic level
TP4 INTB INTB asserted (logic level = 0)
TP5 TXC CAN transmit data. Logic Level
TP6 RXL LIN receiver data. Logic level.
TP7 TXL LIN transmit data. Logic Level
4.5.4 Connectors
Figure 7 shows the location of connectors on the board. The tables below list the pin-outs
for each connector.