NXP Semiconductors FS4500 - 8 Appendix A: FRDM-KL25 Z Software Loading; Updating Opensda

NXP Semiconductors FS4500/FS6500 evaluation boards
KTFRDMFS4500-FS6500EVMUG
FS4500/FS6500 evaluation boards All information provided in this document is subject to legal disclaimers. © NXP B.V. 2017. All rights reserved.
User guide Rev. 4.0 — 12 June 2017
26 / 34
aaa-025559
8 Appendix A: FRDM-KL25Z software loading
The quick start package containing the latest firmware can be downloaded from the
Downloads tab of the following webpage:
http://www.nxp.com/FRDM-KL25Z
Software loading for the FRDM-KL25Z consists of the following:
• Updating the OpenSDA.
• Programming the FRDM-KL25Z
8.1 Updating OpenSDA
1. Press the RST button and connect the USB (the one marked SDA) to the PC.
aaa-025593
2. LED D4 will start blinking.
3. Release the RST button.
4. Drag the file FRDM-KL25Z Quick Start Package\OpenSDA Applications/MSD-
DEBUG-FRDM-KL25Z_Pemicro_v105.SDA and drop it on the KL25Z board icon
which appears as a mass storage device on the host PC.