NXP Semiconductors FS4500 - Programming the FRDM-KL25 Z

NXP Semiconductors FS4500/FS6500 evaluation boards
KTFRDMFS4500-FS6500EVMUG
FS4500/FS6500 evaluation boards All information provided in this document is subject to legal disclaimers. © NXP B.V. 2017. All rights reserved.
User guide Rev. 4.0 — 12 June 2017
27 / 34
aaa-025594
5. Disconnect the board.
8.2 Programming the FRDM-KL25Z
The software bundle for FRDM_FS6500 includes a USBtest3.hex file that programs
FRDM-KL25Z with the needed firmware. The procedure is as follows:
1. Connect USB (the one marked SDA).
2. Drag the file FRDM_FS6500_Test_Package\FRDM_KL25Z_Flash\USBtest3.hex
and drop it onto the KL25Z board icon that appears as a mass storage device on the
host PC.
aaa-025595
3. Unplug the mini USB.