Chapter 1
Overview
The T2080RDB-PC is a high-performance computing evaluation, development, and test platform supporting the T2080 QorIQ
®
Power Architecture
®
processor. The T2080RDB-PC is optimized to support the high-bandwidth DDR3L memory and a full
complement of high-speed SerDes ports. This system has two working modes, the Standalone mode and the PCIe Endpoint
mode. The motherboard, inside the T2080RDB-PC, is a PCIe form factor card and it is installed in a custom 1U chassis. The
system is in standalone mode by default and you can remove the PCIe from its chassis for PCIe Endpoint mode operation.
The T2080RDB boards are using NXP C29x Crypto Coprocessor series silicon.
NOTE
1.1 Related documentation
The table below lists the related documentation:
Table 1. Related documentation
Document name Description
QorIQ T2080
Reference Manual
This document provides a detail description on the T2080 QorIQ multicore processor and on some of its
features such as memory map, serial interfaces, power supply, chip features, and clock information.
T2080
Product Brief
This document provides an overview of the NXP T2080 features and examples of the T2080 usage.
QorIQ T2080
Data Sheet
This document contains the T2080 information on pin assignments, electrical characteristics, hardware
design, considerations, package information, and ordering information.
Some of the documents mentioned above may be available only under a non-disclosure agreement (NDA). To
request access to these documents, contact your local field applications engineer or sales representative.
NOTE
1.2 Acronyms and abbreviations
Table 2. Acronyms and abbreviations
Usage Description
COP Common On-chip Processor
CPC CoreNet Platform Cache
CPLD Complex Programmable Logic Device
DIMM Dual In-Line Memory Module
DIP Dual In-Line Package
DMA Direct Memory Access
DPAA Data Path Acceleration Architecture
DRAM Dynamic Random Access Memory
DUT Device Under Test
Table continues on the next page...
NXP Semiconductors
QorIQ T2080 Reference Design Board (T2080RDB-PC) User Guide, Rev. 1, 08/2021
User Guide 4 / 44