E
69
Power off time
If the camera remains unused for a certain period of time while the camera is powered on, the
camera will switch to an "idle" mode, and eventually turn itself off to conserve the power.
Inactivity period Inactivity period Camera Status
(Batteries) (AC Power Adapter)
60 seconds 60 seconds Stay Idle
3 minutes 30 minutes Shut Off
If the camera is idle, re-activate the camera by pressing any button or rotate the mode dial. If
the camera has powered-off then you must turn the camera on again by sliding the POWER
switch. To change the power saving interval when the camera is charging with batteries, first
press the OK button. Then select the power-off interval you prefer by using the
/ button and
then OK button to confirm.
[3 min], [5 min], [10 min], [30 min], [OFF]
The camera defaults to [3 min].
Set to default
If you wish to restore all camera settings to their original status,
select this option and then press the OK button. Then select
[ No] or [Yes] by using the
/ button and then OK button to
confirm.
To Next Page
Loading...
Need help?
General
