Objet Connex500 - Page 59

DOC-13000 Rev. E 7–59
Connex500/350 User Guide
Status
Thiscolumnshowsthestatusofeachtestafteryourunit:
Test Selection Area IntheTestSelectionarea,atthebottomofthescreen,youcanquicklyselect
orde‐selecttestsbytheircharacteristics:
Running Tests
To run the selected tests:
¾
ClickRun .
Testsuccessfullycompleted.
Testfailed.
Unknownresults.(Thetesthasnotbeenrunyet.)
All
Clicktosel ectallofthetestsinthelist.
None
Clicktode‐selectallofthetestsinthelist.
Unknown
Clicktosel ectalltestthathavenotbeenrunyet(Status = ?).
Group
Usethismenutoselecttestsbycomponentcategory.
Selection
Set
Usethismenutoselectapre‐configuredsetofteststorunat
specifiedtimes(computerstartup,beforeprinting,etc.).
After you run a test, the Save and View command buttons are added to the
All manuals and user guides at all-guides.com