Page 62
Instruction Manual Easygraph
• Language:
The language which the program uses for output
can be selected from among German, English,
French and Italian.
• 3D-Image
This screen button is used to adapt the red-green
3D image to the viewing spectacles which are
used.
Red-Green: Red glass left, green glass right.
Green-Red: Green glass left, red glass right.
• Release (default)
This field determines whether the automatic
release of the function
"Start New Examination"
first is locked or released.
• Print
Printout can take place in black-and-white or in
color. Printout corresponds to the contents of the
screen if "Color" is selected; on the other hand,
the background remains white in a black-and-
white printout (this saves ink and speeds the
printout).
• Fourier maps
Allows to add the spherical equivalent to the
decentration map or to the irregularities map that
are shown in the Fourier analysis (see 7.5.2.4
page 27).
• Communication
The type of interface can be chosen between
serial and USB. Presently the Easygraph
supports the USB interface only. With the switch
[System->] the details of the chosen type of
interface can be selected (see 7.5.4.1 page 63).
If a setting is changed, any related values in the
examination displayed at the moment automatically
change to match.
The [System ->] button permits you define the
interface for communicating with the Easygraph (cf.
7.5.4.1 page 63).
The [Contact lens ->] button leads to the
configuration menu of the contact lens database (cf.
7.5.4.2 page 64).
The [Use] button causes the setting which has been
made to be used for the rest of the present program
session; however, the setting previously stored in the
computer's memory is again activated the next time
the program is started.
Pressing the [Save] button stores the new setting in
the computer’s memory, so that this setting will be
activated in future every time the program is started.
The [Cancel] screen button rejects any changes just
made and exits from this function.
The version number of the examination software is
shown at the bottom right.
To Next Page
Loading...
Need help?
General
