OHAUS Defender 3000 - Page 45

Defender 3000 Indicators EN-43
When the i-DT33P or i-DT33XW indicator is connected to a base that does not include a memory module, but
supports load cell adapter connection, the connection between the indicator and the base shall be sealed by
using a connector cover (P/N: 30538022), sealing sticker or wire seal.
i-DT33P
Figure 5-7. i-DT33P Sealing (Connecting cable with connector and memory module)
Figure 5-8. i-DT33P Sealing (Connecting cable with connector and without memory module)
Wire seal
Paper seal