EN-2 EB SERIES
1. INTRODUCTION
This manual contains installation, operation and maintenance instructions for the EB
Series Weighing Scale. Please read the manual completely before installation and
operation.
1.1 Product Description
The EB Series is an economical compact bench scale that offers accuracy, durability
and portability in an easy-to-use design for light industrial general weighing applica-
tions.
1.2 General Features
• Capacity models: 3kg, 6kg, 15kg, 30kg with maximum displayed
resolution of 1:30,000
• Stainless steel weighing pan
• Durable plastic housing
• 1-window, backlit LCD with prominent 25mm high digits
• Fast display < 2 seconds of weight and count results
• kg, g, lb and oz weighing units
• Dedicated TARE key for simple and fast operation
• Accumulation function for weight and parts count
• Application modes: Checkweighing, Count and Percent
• User-programmable weight and parts HI/LO checking mode with
audible buzzer
• Adjustable filtering level for weighing under various conditions
• 80-hour Internal rechargeable battery with power-saving Auto-shut off
1.3 Safety Precautions
For safe and dependable operation of this scale, please comply with the
following safety precautions:
• Verify that the input voltage printed on the AC Adapter and the plug type
matches the local AC power supply.
•
Make sure that the power cord does not pose an obstacle or tripping hazard.
• Disconnect the scale from the power supply when cleaning the scale.
• Do not operate the scale in hazardous or unstable environments.
• Do not drop loads on the platform.
• Use only approved accessories and peripherals, as available.
•
Operate the scale only under ambient conditions specified in these instructions.
• Service should be performed by authorized personnel only.
•
To Next Page
Loading...
