OHAUS PX125D - 5. Menu Settings and Configuration

EN-24 PX Series Balance
5. MENU SETTINGS
5.1 Menu Navigation
TABLE 5-1. USER MENU STRUCTURE
Calibration
Setup
Units
RS232
Print
GLP
Factory
Reset
Lockout
Internal Cal
Language
Gram
Baud Rate
Stable Only
Header 1
Reset All
Calibration
InCal
Adjust
Filter Level
Kilogram
Transmission
Numeric
Only
Header 2
Setup
Span Cal
AZT Milligram
Handshake
Single
Header
Header 3
Units
Linearity
Cal
Auto Tare
Carat
Print To
Header 4
RS232
Graduations
Newton
Auto Print
Header 5
Print
Date format
Pound
Header
Balance
Name
GLP
Date Ounce
Date and
Time
User
Name
Factory
Reset
Time Format
Ounce Troy
Balance ID
Project
Name
Time Grain
Balance
Name
Brightness
Pennyweight
User Name
Auto Dim
Momme
Project
Name
Capacity Bar
Mesghal
Application
Name
Approved
Mode
Hong Kong
Tael
Result
Singapore
Tael
Gross
Tanwan Tael
Net
Tical
Tare
Tola
Line Feed
Note: PX balances are classified into InCal models and ExCal models.
5.1.1 Changing Settings
To change a menu setting, navigate to that setting using the following steps:
Enter the Menu
Long press the Menu button to enter the Menu.
Select the Sub-Menu
Press No to step between the sub-menus, and press Yes to enter the sub-menu.
Select the Menu Item
Press No to step through the Menu Items, and press Yes to enter the displayed Menu Item.