EN-34 PX Series Balance
5.6.5 Auto Print
Off = disabled
On Stability
1
= printing occurs each time the stability criteria are met.
Print Interval
2
= printing occurs at the defined time interval.
Continuous = printing occurs continuously.
1
When On Stability is selected, set the conditions for printing.
Load = Prints when the displayed load is stable.
Load and Zero = Prints when the displayed load and zero readings are stable.
2
When Print Interval is selected, set the time interval using the numeric keypad.
Settings of 1 to 3600 seconds are available. Default is 0.
5.6.6 Header
On = the header is printed.
Off = the header is not printed.
5.6.7 Date and Time
On = the date and the time are printed.
Off = neither the date nor the time is printed.
5.6.8 Balance ID
On = the balance ID is printed.
Off = the balance ID is not printed.
5.6.9 Balance Name
On = the balance name is printed.
Off = the balance name is not printed.
5.6.10 User Name
On = the user name is printed.
Off = the user name is not printed.
5.6.11 Project Name
On = the project name is printed.
Off = the project name is not printed.
5.6.12 Application Name
On = the application name is printed.
Off = the application name is not printed.
5.6.13 Result
On = the weighing result is printed.
Off = the weighing result is not printed.
5.6.14 Gross
On = the gross weight is printed.
Off = the gross weight is not printed.
5.6.15 Net
On = the net weight is printed.
Off = the net weight is not printed.
To Next Page