EN-4 PX Series Balance
2. INSTALLATION
2.1 Unpacking
Carefully remove your PX balance and each of its components from the package. The included components vary
depending on the balance model (see the list below). Save the packaging to ensure safe storage and transport.
Please read the manual completely before installing and using the Adventurer balance to avoid incorrect operation.
Components included:
x Balance
x Power adapter + Attaching plug
x Stainless steel pan
x Pan support (for 0.1 g / 0.01 g / 0.00001 g model only)
x Warrenty card
2.2 Select the Location
Avoid heat sources, rapid temperature changes, air current or excessive vibrations. Allow sufficient space.
2.3 Leveling
Be sure the balance is level before it is used or after its location is changed.
The PX balance has a level bubble in a small round window beside the display.
To level the balance, adjust the 4 Leveling Feet until the bubble is centered in the circle.
Please refer to the Figure 2-1 for leveling.
Figure 2-1. Leveling
To Next Page