Oki B4500 - Page 126

43502101TH Rev.1 126 /
Oki Data CONFIDENTIAL
No. 1
No. 2
No. 3 *
T2 TBL
No. 3 *
T2 POS
0 mm *
If the Menu key is
pressed menu change.
0 mm *
+1 mm
˜
+7 mm
-8 mm
˜
-1 mm
Selects the download table for the 2nd tray.
Sets the amount of feeding paper from the 2nd tray.
(Sets the amount to TOF position).
Press the Value+ or Value- key.
Press the Value+
or Value- key.
0 mm *
+1 mm
˜
+7 mm
-8 mm
˜
-1 mm
EF POS
0 mm *
Sets the amount of feeding paper from Multi Purpose
Feeder. (Sets the amount to TOF position.)
Press the Value+
or Value- key.
No. 1
No. 2
No. 3 *
EF TBL
No. 3 *
Selects the download table for the Multi Purpose Feed-
er.
Press the Value+
or Value- key.
CH ADJ
DISABLE
CH ADJ
ENABLE *
Sets CH’s voltage setting adjustment logic Enable/Dis-
able.
Press the Value+
or Value- key.
SB2 ADJ
DISABLE
SB2 ADJ
ENABLE *
Sets SB2’s voltage setting adjustment logic Enable/Dis-
able.
Press the Value+
or Value- key.
+3
+2
+1
0 *
- 1
- 2
- 3
CH VOLT
0 *
Changes the CH’s default voltage.
Press the Value+
or Value- key.
+3
+2
+1
0 *
- 1
- 2
- 3
SB2 VOLT
0 *
Changes the SB2’s default voltage.
Press the Value+
or Value- key.
+5
+4
+3
+2
+1
0 *
- 1
- 2
- 3
- 4
- 5
CH V ADJ
0 *
Changes the CHSUB’s default voltage (for the drum ro-
tations at 18PPM).
Press the Value+
or Value- key.
0 *
- 1
- 2
CH V MAX
0 *
Changes the CHSUB’s default voltage (for the drum ro-
tations at 8PPM).
Press the Value+
or Value- key.
Press the Value+
or Value- key.