B6500 Network User’s Guide
Printing from a Windows Computer - 15
Configuring as a Network Printer
Windows 95/98/Me
When printing using TCP/IP, the Oki LPR utility is the only option to use.
The following procedure should be used.
When installing the driver, ensure it is installed as a local printer and not
a network printer. Ensure the appropriate printer driver has been installed
in Windows.
Install the Oki LPR utility (“Installing the OKI LPR Utility” on page 21) of
this manual and add the printer installed earlier.
Windows NT 4.0
With Windows NT 4.0, you have two options for printing using TCP/IP.
They are:
>Oki LPR
> Microsoft LPR
In order to use Microsoft LPR, it must first be installed into your operating
system.
NT 4.0 requires administrator privileges.
Oki LPR
Please follow the procedure described in “Configuring as a Network
Printer”, “Windows 95/98/Me” on page 15.
Microsoft LPR
To install this port, the following needs to be carried out.
1. Select [Start], [Settings], [Control Panel] and then select
[Printers].
2. Select [Add Printer] Wizard.
3. Select [My Computer] and then [Next].
4. Select [Add Port].
5. Select [LPR Port] and then [OK].
6. In [Name or address of server providing lpd] type the host name or
IP address of the host for the printer you are adding.
7. In [Name of printer or print queue on that server] type the logical
printer name "lp" and then click [OK].
To Next Page
Loading...
