Oki B6500

B6500 Network User’s Guide
Printing from UNIX - 33
> If several parameters are specified in one "lpr" command, data
may not be printed correctly.
> The system default is used if no tray number is specified, a
specified tray is not loaded, or paper of a specified size is not
loaded.
> This option is for specifying a paper size only. Paper is selected
but the document size is not corrected according to the paper
size.
> If the print data specifies a paper tray, the tray specification by
the data becomes valid and that by the -C option becomes invalid.
> If an unacceptable combination is specified, the printer may not
operate correctly.
> For some print language, the specification may be invalid.
Selecting a Paper Output Tray
The following parameters can be specified:
Selecting a Paper Type
The following parameters can be specified:
Parameter Description
OUTUP/outup Ejects prints to the rear tray (option).
OUTDOWN/outdown Ejects prints to the center tray.
Parameter Description
PTS/pts Selects Plain paper.
PT1/pt1 Selects Heavy weight paper 1.
PT2/pt2 Selects Heavy weight paper 2.
POH/poh Selects Transparency.
PRC/prc Selects Recycled paper.