Oki B6500

B6500 Network User’s Guide
Printing from a Macintosh Computer - 37
Printing from a Macintosh Computer
This section explains the installation procedure for printing from a
Macintosh computer.
System Configuration
As the printer supports EtherTalk and LPD protocol, you can print from
Macintosh.
NOTE
> Printing using the LPD protocol is available only with the Mac
OS X.
Target Computers
The printer supports a Macintosh or Power Macintosh with the following
OS:
> Mac OS 9 and up
>Mac OS X
Refer to:
> User Guide (PostScript Driver)
Set Up Procedure
The setting procedure is as follows:
1. Setting up the printer
Use the printer control panel or printer web page to set the following
port to [Enable].
> Printing through LPD: LPD port (default: [Enable])
> Printing through EtherTalk: EtherTalk port (default: [Disable])
NOTE
> For details on how to set the port, refer to the User Guide.
> The printer web page allows more detailed settings.
2. Setting up the Macintosh
Install the printer driver (Adobe PS) for Macintosh. Install the screen
font if necessary.
Refer to:
> User Guide (PostScript Driver)