B6500 Network User’s Guide
Printing from UNIX - 34
Specifying 2 sided Printing
The following parameters can be specified:
NOTE
> If several parameters are specified in one "lpr" command, data
may not be printed correctly.
> The system default is used if no parameter is specified.
> If the print data specifies 2 sided or 1 sided printing, the
specification by the data becomes valid and overrides that by -C
option.
Parameter Description
DUP/dup 2 sided printing as follows:
B6500_NUG_5.jpg
TUMBLE/tumble 2 sided printing as follows:
B6500_NUG_6.jpg
SIMP/simp 1 sided printing
To Next Page
Loading...
