B6500 Network User’s Guide
Printing from UNIX - 29
Job Number
This option specifies the job number of the print data to be deleted.
These numbers can be checked by issuing a "lpstat" command.
This option is invalid in the non-spool mode.
Precautions
> Print data that consists of multiple files sent in one print
instruction cannot be deleted file by file. All the files will be
deleted at one go.
> This command will become invalid if it is executed without
options having been specified or if there is no print data which
matches the option.
> A workstation can only delete print data it has sent. It cannot
delete print data sent by other workstations.
> When a command to delete print data is received, the file
concerned will be deleted even if it is in the process of being
printed. Only the print data available prior to file deletion will
be printed.
Sample
To cancel the print data related to the files of printer "P001" (Job number:
P001-27), enter the following command:
%cancel P001-27
To cancel all the printer data of printer "P001", enter the following
command:
%cancel P001 -e
To Next Page
