Oki B6500

B6500 Network User’s Guide
Troubleshooting - 47
Using Windows NT 4.0/2000/XP/SERVER 2003
The Printer Is Not Printing
Cause Verification Action
Incorrect IP address. Ask the network
administrator to check
that the IP address is
correct.
Set up the correct IP
address for the printer.
If LPD spool is set to
[On], the print data sent
by the user in a single
print instruction has
exceeded the remaining
storage capacity of the
destination device.
Check the remaining
storage capacity of the
destination device.
1. If single print data
has exceeded the
storage capacity of
the destination
device, free space
on the device, or
split the file into
smaller ones to
keep them below
the remaining
storage space.
2. If multiple files
have exceeded the
storage of the
destination device,
reduce the number
of files which can be
sent at a time.
An irrecoverable error
has occurred during
printing.
Check the error
message on the printer
control panel.
Switch off the printer,
then switch it on again.
The data format of the
print data to be
processed by the printer
and that sent by the
computer are different.
- Disable the output
function of Ctrl-D.