Oki B6500

B6500 Network User’s Guide
Printing from a Windows Computer - 21
OKI LPR
The OKI LPR Utility is network software which supported TCP/IP printing
on Windows Me, Windows 98, and Windows 95. It redirects print data from
the LPR port to the specified IP address.
Installing the OKI LPR Utility
The OKI LPR utility requires that the TCP/IP protocol be installed on your
Windows system. To install the TCP/IP protocol onto your Windows
system, consult your Windows manual.
1. Set up the printer driver and designate the output destination to be
Local Printer (LPT:). For information on setting up your printer
driver, see the printer user manual.
2. Insert the CD-ROM provided with your printer into the CDROM
drive. If the Menu Installer doesn't start automatically, click
Start → Run → Browse. Browse to your CD-ROM and click
Install
→ Open → OK.
3. Select [Network Software].
4. Select [Installation/Config]
5. Select [Oki LPR].
6. Follow the on-screen instructions.
7. Select [Install Oki LPR].
8. Follow the on-screen instructions.
9. Click [Next] when the [Welcome] screen is displayed.
10. Verify [Destination Folder] and [Spool Folder] and click [Next].
11. Check [Register in Startup] if you want automatic startup as
Windows boots up. Check [Launch as Minimized] if you want to
startup in the Icon state and click [Next].
12. Verify the program folder name and click [Next]. The installation
starts.
13. When the installation ends, the [Setup complete] screen is
displayed. Check [Yes, I want to launch OKI LPR Utility now] and
click [Finish]. Check [Yes, I want to view the ReadMe File] if you
want to read the Readme file. The OKI LPR utility starts.
14. Select [Add Printer] on the [Remote Print] menu.
15. Select [Printer] to accept the printer that has been added in
Step 1.