Oki B6500 - Specifying Color and Print Modes

B6500 Network User’s Guide
Printing from UNIX - 36
Specifying Color and Print Modes
The following color and print mode parameters can be specified:
Note
> If several parameters are specified in one "lpr" command, data
may not be printed.
> For some print language, the specification may be invalid.
> The system default is used if no parameter is specified.
> The color setting is not available on this printer.
Printing
To specify the output format of printing, enter the following command:
-C, [Parameter], [Parameter]
Enter a "," (comma) after -C followed by the parameters which specify the
output format. To specify multiple parameters, separate them with ",".
For example, to output a file named "file1" 2-sided on A4 to printer "P001",
enter the following command:
%lpr -P P001 -C, DUP, A4 file1
Important:
> If the command specified by the -C option exceeds 64
characters, the operation may not function correctly.
Parameter Description
CC/cc Selects color for color mode and quality priority
for print mode.
CB/cb Selects color for color mode and speed priority
for print mode.
GC/gc
Selects monochrome for color mode and quality
priority for
print mode.
GB/gb
Selects monochrome for color mode and speed
priority for print mode.
AC/ac Selects auto (color/monochrome) for color
mode and quality priority for print mode.
AB/ab Selects auto (color/monochrome) for color
mode and speed priority for print mode.