Oki B6500 - Page 24

B6500 Network User’s Guide
Printing from UNIX - 24
Set Up Procedure
The setting procedure is as follows:
1. Setting up the printer
Set the IP address on the printer control panel.
Use the printer control panel or printer web page to set the LPD port
to [Enable] (default: [Enable]).
NOTE
> Before activating the LPD port, set the IP address of the
printer. For details on how to set the IP address and the port,
refer Printer Configuration.
> The printer web page allows more detailed settings.
2. Settings of the workstation
Set the printer in the workstation.
See “Setting up the Workstation” on page 25.