B6500 Network User’s Guide
Precautions and Limitations - 44
Delete
> Print data which consists of multiple files sent in one print
instruction, cannot be deleted file by file. All the files will be deleted
at one go.
> This command will become invalid if it is executed without options
having been specified or if there is no print data which matches the
option.
> A workstation can only delete print data it has sent. It cannot delete
print data sent by other workstations.
> Print data which is in the process of printing may not be deleted.
Inquiry
> Long file names will be truncated.
> Up to 64 print instructions can be displayed.
> If two or more types of print languages/modes are set up on a single
workstation, identical job numbers may be displayed when an inquiry
command is issued.
> o In the non-spool mode, the client must be a Windows NT machine
to use this option.
Others
> When the IP address or the computer name of a workstation is
changed, the printer may not process inquiries or deletions correctly.
Make sure the printer is free of all spooled data and switch off/on the
printer.
NOTE
The function to stop/eject print data spooled to the printer spool can
be operated from the printer control panel. Refer to the Setup Guide
for information on this operation.