- 138 -
Cleaning
5
Maintenance
5 Wipe the two paper feed rollers (6) with
a wet cloth that has been wrung out
well.
6
6 Open the separation roller cover (7)
forward while pressing the center part
of the MP Tray (2). Wipe the separation
roller (8) with a wet cloth that has been
wrung out well.
7
8
2
7 Close the separation roller cover (7).
7
8 Lower the paper set cover (5).
5
9 Hook one tab (4) of the paper feed roller
cover by pressing the right arm (3)
inward while lifting up the MP Tray (2)
lightly.
Note
● If closing the MP Tray without returning the tab to
the correct position, the paper set cover may be
broken. Be sure to return the tab to its original
position.
2
3
4
To Next Page
Loading...
