Oki B721 User Manual

- 58 -
Connecting to a Computer
3
Printing
5 If the access point of the wireless LAN
checked in step 1 supports WPS, the
printer is automatically connected. Go to
“WPS-PBC” P.58.
If it does not support WPS, you must enter the
setting data for the wireless LAN on the printer
manually. Go to “Conguring manually” P.63.
Terminology
● SSID
An ID used to identify the connection
destination network. Wireless communications
can be used by setting this product with the
SSID of the connection destination wireless
access point.
● Security Settings
When using a wireless LAN, security settings
can be congured to prevent the transmitted
information from being intercepted or illegal
access to the network. The security settings
need to be congures to the same settings as
the wireless access point.
● WPS
A wireless LAN setting method provided
by Wi-Fi Alliance, a wireless LAN industry
group. There are two available methods, a
push button method and PIN code method,
and in the push button method the wireless
LAN settings can easily be congured simply
by pressing a [WPS] button on the wireless
access point. In the PIN code method, the
wireless LAN settings can easily be congured
by registering the 8-digit number assigned to
this product to the wireless access point.
● Infrastructure mode
This mode communicates through the wireless
access point. This product does not support
the ad-hoc mode in which communication is
performed directly with the computer.
 WPS-PBC
1 Press the scroll button to select
[Wireless Setting] and then press the
<ENTER> button.
䣈䣷䣰䣥䣶䣫䣱䣰䣵䢢䢢䢢䢢䢢䢢
䢢䢢䢢
䢵䢱䢵
䣙䣫䣴䣧䣮䣧䣵䣵䢢䣕䣧䣶䣶䣫䣰䣩
2 Enter the administrator password
using the ten-key pad, then press the
<ENTER> button.
The factory default password is “aaaaaa”. Press
the <ENTER> button whenever inputting one
character.
䣇䣰䣶䣧䣴䢢䣒䣣䣵䣵䣹䣱䣴䣦
3 When the display shown below appears,
read it carefully. Press the <ENTER>
button or wait until the display changes.
䣙䣫䣴䣧䣮䣧䣵䣵䢢䣵䣧䣶䣶䣫䣰䣩䢢䢢䢳䢱䢵
䣇䣰䣣䣤䣮䣫䣰䣩䢢䣹䣫䣴䣧䣮䣧䣵䣵
䣰䣧䣶䣹䣱䣴䣭䢢䣥䣱䣯䣯䣷䣰䣫䣥䣣䣶䣫䣱䣰䢢
䣹䣫䣮䣮䢢䣦䣫䣵䣣䣤䣮䣧䢢䣹䣫䣴䣧䣦
4 Check that [Automatic Setup (WPS)]
is selected and then press the <ENTER>
button.
䣙䣫䣴䣧䣮䣧䣵䣵䢢䣐䣧䣶䣹䣱䣴䣭䢢䣕䣧䣮䣧䣥䣶䣫䣱䣰
䣙䣫䣴䣧䣮䣧䣵䣵䢢䣴䣧䣥䣱䣰䣰䣧䣥䣶䣫䣱䣰
䣃䣷䣶䣱䣯䣣䣶䣫䣥䢢䣕䣧䣶䣷䣲䢢䢪䣙䣒䣕䢫
䣙䣫䣴䣧䣮䣧䣵䣵䢢䣕䣧䣶䣶䣫䣰䣩䢢䢢䢢䢢䢢䢳䢱䢳

Oki B721 Specifications

General

Print Technology	LED
Resolution	1200 x 1200 dpi
Processor	533 MHz
Memory	256 MB
Connectivity	USB, Ethernet
Duplex Printing	Standard