What causes vertical lines on Oki Printer pages?
If vertical lines are appearing on your Oki Printer's output, it could be due to a damaged image drum cartridge. In this case, replace the image drum cartridge. Another possible cause is low toner. Try opening the top cover and tapping the cartridge a few times to evenly distribute the remaining toner. If the lines persist, replace the toner cartridge.
Why does toner rub off Oki Printer prints?
If toner comes off when rubbed on prints from your Oki Printer, the paper settings might be incorrect. Set the correct value for media type and weight in the Media menu, or try setting one value lighter for media weight. If you are using recycled paper, try setting one value thicker for media weight in the Media menu.
How to fix vertical white lines on Oki Printer printouts?
If you see vertical white lines on your Oki Printer's printed pages, it could be due to a few reasons. The LED head might be dirty; try wiping it with a soft, lint-free cloth. Alternatively, the toner could be low. In that case, open the top cover and gently tap the cartridge to redistribute the toner. If the issue continues, replace the toner cartridge. Foreign materials in the image drum or a dirty light-shielding film could also be culprits; consider replacing the image drum cartridge or wiping the film with a soft, lint-free cloth.
Why is my Oki Printer printing so lightly?
If your Oki Printer's output is too light, several factors could be responsible. First, check if the toner cartridge is properly seated and reinstall it if necessary. Low toner can also cause light printing; try redistributing the toner by tapping the cartridge after opening the top cover, and replace it if the problem persists. Ensure that the paper isn't moist and is stored in the correct conditions. Verify that you're using paper recommended for the printer. Finally, adjust the media type and weight settings in the Media menu, especially if you're using recycled paper, setting one value thicker for media weight.
Why are images fading vertically on my Oki Printer?
If printed images from your Oki Printer are fading vertically, the LED head may be dirty; try wiping it with a soft, lint-free cloth. Also, the toner might be low. You can attempt to redistribute the toner by opening the top cover and tapping the cartridge a few times. If fading continues, replace the toner cartridge. Finally, ensure you are using paper that is suitable for the printer.
Why is the white area stained on Oki Printer prints?
If the white areas of paper are lightly stained when printing with your Oki Printer, it could be due to static in the paper. Make sure to use paper stored in proper temperature and humidity conditions. Another reason might be that the paper is too thick; try using thinner paper. Low toner can also cause this issue; open the top cover, tap the cartridge a few times to redistribute the toner, and replace the cartridge if needed.
What causes horizontal lines on Oki Printer prints?
If horizontal lines and spots appear periodically on your Oki Printer's output, the cause depends on the interval between them. If the interval is about 94mm (4in), the image drum might be damaged or dirty; try wiping it lightly with a soft cloth, and replace it if damaged. If the interval is about 30mm (1.2in), there may be foreign particles in the image drum cartridge; try opening and closing the top cover and printing again. If the interval is about 86mm (3.4in), the fuser unit might be damaged, and you should replace it. Finally, if the image drum cartridge has been exposed to light, replace it if the problem persists.
What to do if Oki Printer images are partially faded?
If you're experiencing partially faded images with white spots and lines in solid prints from your Oki Printer, the paper might be too moist or dry. Ensure you are using paper stored in proper temperature and humidity conditions.
Why is glossiness not uniform on Oki Printer prints?
If the glossiness is not uniform on prints from your Oki Printer, the thickness and type of paper may be set incorrectly. Correct this by setting the appropriate values for media type and media weight in the Media menu, or try setting one value lighter for media weight.
General| Print Speed (Black) | 30 ppm |
|---|---|
| Print Speed (Color) | 30 ppm |
| Duplex Printing | Yes |
| Internal Memory | 256 MB |
| Maximum Internal Memory | 768 MB |
| USB 2.0 Ports Quantity | 1 |
| Print Technology | Laser |
| Connectivity | Ethernet |
| Standard Output Capacity | 150 sheets |
| Maximum Output Capacity | 150 sheets |
| Standard Printer Languages | PostScript 3 |
| Operating System Compatibility | Windows, Mac |
To Next Page
